OWB Holster for "the outdoor woods"

A little throwback to Over the Hedge there in the title if you didn't catch it.  Yes, I watch too many kid's movies.

Anyways, this past weekend was the annual river float trip that friends and family faithfully take, and since I've missed the last two I made sure I was there.  In preparation, I made a kydex OWB holster for the P30 because rowing a canoe for two days with a pistol tucked down by the crotch didn't sound like it would make for good times.  This type of holster is super easy to make -- without the given interruptions in my house it probably took just under an hour total:


Retention is excellent, and there was no need for a strap, snap, or other retention device. In light of a friend's previous river disaster, I did attach a BLACKHAWK! pistol lanyard so that if the gun or gun/holster came loose for any reason I would have a way of not losing it for five years. Unfortunately, a gigantic thunderstorm made us give up on going to the river, and instead we went to a remote campsite on private property on a nearby reservoir. That turned out to be a smart decision because the night the storm hit the river rose six feet in four hours.

I did manage to end up on the wrong side of the canoe's gunwale close to the bank, and wading around in silted water showed the inferiority of the beach-sand-torture-test, as the insides of the P30 were thoroughly coated in it. I don't know if the gun would have fired or not, but it certainly was hard to rack the slide. I did have a cleaning kit and SLIP 2000 to make her smooth again. Overall though the holster held well and protected the gun from bumps and bruises. I'm really enjoying this holster making stuff!

Casting bullets before swineflu

I have successfully come back to the land of the living now that the sickness has released its grasp, so to celebrate I thought I'd show off what I was doing on Saturday, which was during the worst of it. I felt like a pale, clammy, fever-filled fireball casting oh-so-beautiful boooolits in the backyard!

Actually, I was mostly casting lead ingots using my wife's muffin pans:



If you buy wheel weights from the scrapyard, you would be surprised at how you can turn three mostly filled buckets of lead, steel clips, razor blades, and dried up dip balls into lead pucks by melting them all down in a iron pot. Just know that when you melt down what you put in it, don't try to dump any more into the hot melt or molten lead will literally explode all over the place; the melt doesn't like anything cold or wet to touch it.

Afterwords, it's best to not use the muffin tins for food, or even bring them into the house again. Tinseled muffins may look delicious, but it really settles into the bottom of your stomach!

Here's a pic of me warming the shiny new Lyman 9mm mold that I got:



Yes, my gloves are flashing gang signs.

I sorted the bullets last night that I had made on Saturday and only about a third were good. There's a couple of reasons for this, the first being that new molds take some time to "learn;" and second, I was paying more attention to casting ingots. I had a couple of buckets of wheel weights sitting around, and now I have one bucket full of clean lead pucks that fit nicely into my LEE 10lb melter. Being able to grab a handful of lead ingots when making a batch of bullets is way easier than trying to melt individual wheel weights in your casting melter, and makes the mass production of target bullets a snap. Now that I think about it, I'm going to start looking for either a 115 grain or 124 grain semi-wadcutter mold for mass bullet production. I'll save a ton of lead that way (pun intended).

In other news, my Concealed Carry Concepts Shaggy holster came in the mail yesterday:



It has excellent fit and finish, but sadly doesn't have a lick of duct tape. Here you can see the "wedge," which is much better done than the one I did:



I'm thinking he must have a die or something to make the wedge so clean. I really dig the leather backing on the holster; it should make high round count range sessions a lot more comfortable.

I was also able to redeem myself Saturday night by making my brother a serviceable holster for his Walther PPQ. I was embarrassed that he was walking around with the one I had made the other night. I still haven't been out shooting for some time, which is unfortunate because I've got all sorts of things going on that I need to get done. For one, I've started reloading some quality .380 acp ammo for a Ruger LCP for my mom, as promised to her; I've got some more ammunition weather proofing tests to do; I've got a full sized Mosin Nagant to sight in, and I want to nail down a target load for the P30 with my new 147 grain cast bullets. Too many irons in the fire!

Needful things

Having owned all sorts of magazine and utility pouches in my time, I concluded that virtually all of them fell short of my expectations, so I thought I'd do something about it. First, to give you an idea of where I'm coming from, I should describe where I find magazine/utility pouches (hereinafter "pouches" or "mag pouches") to not meet my requirements.

Almost every one I've used tries too hard to tilt the top of the magazine in towards the body to aid in concealment. This is great and all, if it didn't cause the corners of the magazine to poke into my flabby bits, making me take the thing off because of discomfort. Only one pouch I've encountered -- a Galco DMC -- does not do this, but instead lets the magazines cant outward, making the fact that I had 34 rounds of ammo readily apparent. The most uncomfortable pouch(s) I've come across was the Fobus paddle type; I have many of them, and every single one of them felt like I was spearing a gladius into my love handles when putting them on. The single Glock mag pouch was fine when it held a shorty Glock 26 magazine, but was unbearable with a tall Glock 17 magazine.

Two mag pouches that work great and are very comfortable are the FIST Double Mag Pouch, and the Bladetech Single Magazine Pouch with Bladetech clip. Both of these beasties do the unthinkable: they hold the magazine completely vertical, so it doesn't rip open your gut or tent your shirt. The only problem is that I don't rock a 1911 anymore, so that's a no go. With that piece of Bladetech praise out of the way, the Tek-Lok mag pouches from Bladetech are an abomination; getting the Tek-Lok clipped on is like trying to feed a mangled fork down in between your belt, and when you get it locked down the mag pouch slides back and forth on your belt. That's a no go. The Safariland Model 74 is an awesome mag pouch, but again stabs the corner of the magazine base plate into my side.

So in the end I decided to make my own to my requirements:





They are fast to put on.
They stay exactly in the spot on my belt I clipped them to.
They are a PITA to take off, so they won't come off when I don't want them to.
They can be worn OWB or IWB.
They are cheap as dirt.
They don't stab me, so they can be worn indefinitely.

My Leatherman Wave pouch came apart like a two dollar watch a few years ago, and I haven't found a suitable replacement since. The one above took me no time at all to make, and is easy to put on and holds the Wave tight.

You can literally order a ~$7 sheet of .093" kydex from Knifekits.com and, using your wife's hairdryer (or a heat gun), make ten of your own in about 20 minutes. I cut mine out using a bandsaw, but that's because I'm lazy; a razor knife works fine. I just heat up one side at a time and use something flat like a couple of pieces of wood to make the 90 degree angles. Tweak it with some heat and an empty magazine until you get it to hold like you want.

I have a template from the one I came up with if anybody wants it. Just shoot me an email if you do and I'll send it, or if I can remember I'll post it online this week.

SmartCarry Holster Review Illustrated

I've had a SmartCarry holster for the P30 for over a month now, and I have enough data to give a good review. There's lots of reviews out there, but I wanted to make it as inclusive as I could. For ~$50, there's not a lot of risk in buying this holster, and I think for the price it's a smokin' good deal.

I ordered a standard model from their website; I didn't go through a 3rd party to order it, and it took three days for it to get here from Florida. The SmartCarry is made from denim with a waterproof backing and seams made to prevent snags.



For the magazine pouch, to adjust for the height of your spare magazine you use a safety pin. That's all it takes. Fishing down the front of your britches for your magazine when you're at slide lock is another matter, but we'll get to that in a little bit.

This holster is worn below the belt. It works so well at concealing because it has its own belt built in; it's made from elastic and fastened around the waist with velcro. Because of this, there's no clips or loops on the belt around your pants, so there's no trace that you've got anything on you, and on top of that you can tuck your shirt in. Also, because it's in front of your body, there's no printing when you bend. Here's what it looks like hiding it under your pants:



Now, the directions say to secure the SmartCarry's straps around your "hips" so that when you pull up your pants, your belt line sits around your "waist." That is probably correct for some folks, but that's not how it works for me. I do not have an ass to speak of, so my belt and pants slide down until it stops on the only structural part in that area, which is my hips. That is what I consider to be my "waist." The gut that I have accrued over the past few years has formed a shelf above this waist, meaning that I can't make a new waist any higher than that. What I do is strap the SmartCarry straps just below my hip bones, and pull my pants up over them and I'm good to go.



In these pictures I'm wearing 5.11 Covert Cargo pants which work nicely with the SmartCarry. If you look closely under my belt loop on the right side of the picture as you see it (It's on my right as well. The pictures were all taken in the mirror) you can see the only printing you can expect with this holster with a full sized handgun, which is a slight bulge. If your pants sag down throughout the day this bulge will be more apparent as the entire grip will be right up against the belt. I give my pants a quick hike when I stand up from sitting for awhile, and it's good to go. If you're wearing this holster at work with an I.D. badge, clip it to the belt loop above the bulge and it's not an issue.



If you wear a tucked in shirt, definitely wear an undershirt because the velcro on the straps in the back will chafe. Tuck the front of your overshirt behind the SmartCarry, and I would advise tucking the back of your overshirt OVER the strap in the back because it has a tendency to ride up throughout the day, especially when you sit down.

You wouldn't want someone to notice a huge black strap sticking up!



Yeah, I've got the pregnant belly-hold thing going on there in that last picture. So sue me.

They make smaller SmartCarrys for the micro pistols. For fun I thought I'd show you how well this holster would conceal a mouse gun: here's what it looks like hiding a Kahr PM9 9mm with its 3" barrel:




There's no bulge at all. I could wear this holster with the PM9 to the gym under running shorts and nobody would have a clue.

Something most of the reviews on the internet don't mention is that while this holster works great with the right pants, it can go all wrong if you wear the wrong ones. Trust me on this. You have a lot going on in this region of your body as it is: a shirt, undershirt, underwear, pants, and belt are competing for room with a holster, magazine, and pistol. Make sure there's enough room for everybody or some of your softer bits can get mashed when you sit down, and your skivvies will bunch up when you walk.

First, you don't have to go out and buy pants with a larger waist size; keep the pants you already have and use them. Definitely try all your work pants on with this holster beforehand to find the ones that work best. What you need to be concerned about is that your pants have a deep enough crotch. If the distance between the top of your pants and the crotch is short, when you sit or bend down the muzzle of your gun will print this massive, blocky bulge that is sure to startle your co-workers at the water cooler:



Sorry about the mega crotch shot, but somebody had to do it. I don't recall the brand of pants in the above picture, but I got them from Kohls. The front of your pants shouldn't be tight or you'll end up looking like you're wearing a diaper. Or a gun down your pants. Pleated pants do help to get rid of the bulge, as do darker colors:



I wore this under LA Police Gear Operator pants yesterday in front of my family, who all know I carry, and told them to guess where I was carrying while I lifted my jacket, and they had no idea. A full sized gun just disappears. Somebody mentioned in a forum somewhere that you can wear the SmartCarry appendix style and tuck your shirt in over it:




It works okay that way, but wouldn't be my first choice. I didn't check retention like that either, so I can't speak for how well it would hold my gun while a scumbag was kicking me on the ground. Since there's no retention strap, I have to think the gun would come out in my shirt.

The SmartCarry is comfortable when you sit and when you drive. That's a big question that comes up. For me, if my pants have sagged down some and I don't hike them up before I sit, the back of the gun's slide will hit my belt, and my belt will collide with the shelf that my gut makes, which is uncomfortable but only takes a quick adjustment to fix. To prevent this I hike my belt a tad before sitting down and it doesn't happen. Driving for an hour or two, I don't have any issues or need to make any adjustments. It's like I have a 26 oz. weight sitting in my lap. No problem. When walking, I can feel the edges of the holster slightly, more so while walking up stairs, but it's not a concern. I think I could run comfortably wearing this, but I'd have to test it to be sure before hitting the treadmill at the gym.

Bathroom breaks are something to talk about. For a trip to the urinal, just follow the instructions that come with the holster and you'll be fine. There's a piece of the holster underneath the magazine and safety pin that's not occupied by metal, and you can use that to your advantage to gain that extra half inch of comfort. It's the sit down bathroom trips that are easy: again, do what the instructions say - pull your pants down and pull the holster, gun and all, up to your chest and let your shirt come down over it. It takes a moment to do this, and in the slight chance some sicko is watching you do your business, there's nothing showing and you still have quick access to your heater in case Tangos kick in the stall door.

Another concern is how fast the draw is. What good is having a pistol on you if you can't get to it, right? I went out yesterday and did some draws while on the timer so that my dear readers would know. Oh, the things I go through for y'all! While I did forget to bring a standard IWB holster to get some comparative times for (AIWB I average around 1.6 seconds), I managed to get lots of draw times on the SmartCarry, and I was impressed. I've done some dry fire at the house, but this was the first live fire I did with it. I warmed up with 50 rounds from the draw before going for time, and when I started recording times I went for 33 rounds single firing from the draw. My slowest time was 2.95 seconds, and my fastest time was 2.14 seconds, with an average of 2.54 seconds. I was shooting at an 8" steel target at 7 yards with 115 grain Federal FMJ rounds out of the P30, and was wearing the LA Police Gear Operator pants with 5.11 Operator belt, tucked in T-shirt and unzipped jacket.

From my notes, I had one draw that snagged on the front sight which pulled the holster out of my pants. The time during that draw was still 2.59 seconds, so it wasn't critical. I also fumbled a draw - from my notes it was because I'm a moron, and not a fault of the holster. The time on that one was my slowest draw at 2.95 seconds. With the snagged front sight, I found that if I didn't draw the pistol straight up, but canted the butt of the pistol down towards my foot, the sharp edges of the front sight would grab the inside of the holster and pull it out of my pants. Dry fire, dry fire, dry fire. That will keep that from happening. My technique for drawing was to hook the thumb of my support hand into my waistband, minimizing the amount of flesh which would obscure my draw, and then reach down with my gun hand and grab/draw the gun. Keep the grip angled in towards the body during the draw or you'll hit the butt on your belt, which will foul you up. Also, I found it helpful to suck in my gut some so I didn't bang my hand on my gut shelf thingie. A pro tip: before you go to the range for a practice session, trim your nails and file the edges so that they're not sharp or you will tear your gun hand up on your support hand thumb nail.

I did not try any weak hand or strong hand only draws, and I think they would be challenging without a lot of practice. One thing that bothers me about this holster is if I'm holding a child in one arm -- will I be able to draw? It would certainly take longer than a draw from AIWB holster. I'll have to practice that one and find out (not with a living child, of course).

I found two ways to re-holster: pull the SmartCarry up out of your pants, holster the gun, and then tuck it all back in; or, do a reverse of your draw by hooking your waistband with your support hand thumb and reaching in with your gun hand. Just be sure you're watching/paying attention or you can miss the gun pocket on the holster (it's cloth and doesn't stay open) and drop your gun down your pants. Then you can't tell your friends you're a smooth operator. Going for the spare magazine is something that needs to be practiced, as my reloads were an abomination. The hard part is that you have to grab the spare magazine with your support hand, and not with the assistance of your gun hand. Also, your shirt may be fouled up from the initial draw, so there's that to contend with, too. All in all though, you have the option of a reload which is normally not available with deep concealment carry.

In summary, I'm a big fan of the SmartCarry. It's the most concealable way to carry a full sized handgun with spare magazine in comfort if you want to carry without any chance whatsoever at exposing your gun. The draw is obviously slower than IWB carry, but is comparable to pocket carry and you have the option to pull a fighting pistol instead of a mousegun. For me, it won't take the place of AIWB carry, but it works well for day to day carry. There are people on forums who say it doesn't work for them, and that may be true, but for $50 you would be well served to give the SmartCarry a try.

Cooking with CTone

I used to think I couldn't cook to save my life, but this weekend I discovered that I have some talent. In this case, I'm not talking about cooking food; I'm talking about cooking plastic!

Like a black hole, I've been pulling in all sorts of tools for a special project that I've been working on for about half a year, and while I was at it I picked up some tools for making kydex holsters. I successfully made three holsters this weekend, though I only have pictures of one. This is the second holster I made, this time for the P30 -- here is the inside piece of kydex sitting with it in the kydex press while the outside piece cooks in the oven:



The first holster was for a PM9, and the learning curve told me to block the ejection port and tape it with blue painter's tape. I tried to get a picture of the inside of the oven, but it came out kind of gross, so I deleted it. After the piece cooks for 8 - 10 minutes (270 degrees worked best for me), I slid the piece off the bottom of the flat cookie sheet and onto the press, quickly sat the gun on the pencil marks I made, and locked it down:



Here's what it looks like when it's done cooling, which takes around 10 more minutes:



I cut two pieces, leaving an ear on the front side to fold over for a "wedge" to tuck the grip for AIWB carry:



As you can see, there's plenty of definition from the molding. Too much, actually; you have to work the piece over carefully with a heat gun to fine tune it, because if you don't the gun will be stuck fast. It's easiest to mold each side by itself so you have time to possition the gun properly and get a good mold. The two halves are held together with rivets, and to do that you need rivetting dies which I used with an arbor press. I really should have taken pictures of that process, which I'll have to do with the next holster I make. Once the two halves are riveted together, I trim them to shape on a bandsaw and rough finish the edges with a belt grinder and a 120 belt, finishing up with a file and some hand sanding:



Not the greatest picture, I know. I took that one first thing this morning in my dark kitchen as the youngest Beast slept several feet away in the Swing of Peace. There's a bit more to it than acounted for in this post, but I assure you it's easy (except for belt clips; those are a PITA). You can make a kydex press with some lumber, a couple of cheap hinges, and a yoga mat, but this press wasn't too spendy, so I went that route. Basically, for the price of a decent kydex holster, I have all the tools I need to make as many holsters as I want. Cooking is fun!

Raven Concealment Systems Vanguard 2

There's a thread at Pistol-Forum.com and a thread at ARFCOM covering this new holster. It's meant to be for AIWB carry, but would probably work just fine anywhere on the belt, as well as for other modes of carry. The ARFCOM thread is far less understanding towards the VG2, as there are many naysayers there that pooh-pooh AIWB carry in general. It's kind of like clicking on a "show your watch" thread and finding a bunch of morons posting pictures of their iphone.

Looking at the VG2, it seems to me that they were trying to make the original Vanguard holster adjust for ride height and give it better retention. It's the same thing I was going for with my modified Zack holster, but better executed.



The VG2 is also tuckable, and that's a big deal when you can get it, and with a projected cost of $40 or less it's a bargain. I'll have to try one before too long.

Range Report

This is the first bona fide range session I've had since Andy and I went shooting this past summer. All the shooting I've done in between then has been ad hoc, and generally rushed. Today was kinda rushed, but I still clicked off over 500 rounds from the P30, did some more accuracy testing, and tested out the Safariland #27 that I got in the mail yesterday and modified last night.



As always, click on the pictures to make bigger and more beautiful, and also check to see if there's any more pics in my Photobucket account that I didn't post.

The Safariland #27 has been around for a long long time. Rumor has it that Moses used one to CCW his heater past the Pharaoh's guards, and we all know that was a long time ago. It's an inexpensive holster, which means that you can order one and it'll be at your door way before the more expensive holsters arrive. The robust J-hook is very thick and adds to the mass tucked in your waistband, and also isn't the most secure way of retaining the holster. It swivels a bit even if you tighten the allen bolt, so to remedy that I stippled the J-hook with a soldering iron behind where the bolt goes through and it didn't slip at all within the several hours I walked about the house cleaning up after the kids. The #27 doesn't help to tuck the grip in for AIWB carry so I set about adding a wedge to do just that.

My initial design failed, as the wedge I made was not that secure.



My intent was to mount it where the retention screw is, but it moved around too much. I used the plastic from an old muzzle loading stock that I had sitting around by cutting it off with a sawzall, and finishing it using a file and sand paper:





It took some time for me to figure out how to securely place a wedge on the holster without using an adhesive, and my solution was to build a bracket that went from the retention screw to the J-hook screw:



It was cut out of a piece of sheet metal that I had - I don't know the gauge, but I was able to shear it out with incredible difficulty using tin snips in order to keep from waking the rugrats. I had to bend it to match the contour of the holster, and for that I clamped it in a vice to get the initial shape along my contour lines, and put the finishing touches on it with Klein's and channel lock pliers:



I cleaned it up on the belt grinder with a 600 grit belt, and then drilled holes where the plastic gunstock wedge goes:




I truncated the first wedge I made and matched the holes for the bracket; a forster bit counter-sank the holes where the screws ran through:



The bracket was tapped and the screws were run through the wedge into it. The ends of the screws were ground off with a file, and finished on the belt grinder, making sure I kept the whole thing cool by dunking it in water to keep the plastic wedge from melting:




Here's the final product. I added a Bladetech strap instead of the J-hook to make room for the wedge, and also because I find it to be a more secure way to keep the holster on my belt:


My savvy readers will notice that the screws I used look an awful lot like green self-tapping ground screws that have had the outer edge of the head ground off. The whole thing is a little sloppy, and fugly as hell, but I did all this in between diaper changes, sippy cup refills, bathtime, bedtime, and bourbon time, so cut me some slack. Time is not a luxury I have right now, so I measure once and cut once, hoping it all works out in the end.

The holster now keeps the grip tucked into my sucked-in gut quite well:



This is all well and great, CTone, but didn't you mention a range report in here somewhere?

Sure 'nuff, I took all my gear out for a couple of hours to get some rounds on steel:



Any guesses as to where the shrubbery between those steel targets went to? My brothers and their significant others put a metric ton of 9 mil through there every month. Today was my start into some serious shooting using the P30. I started out doing some bench testing for accuracy with the 124 grain+P Speer Gold Dots and the 147 grain +P Federal HSTs. After further review, I'm going to go with the Gold Dots; they shot right to point of aim at 25 yards, and gave me a 1.865" five shot group:



I got great groups from the HSTs as well, but they were not consistent. I shot two groups with them today off sandbags: one measured 1.929" and the other 2.159". Where it was inconsistent was that the point of aim would shift by an inch; this isn't surprising if you pay careful attention to your group average, and not just the tightest one. Each of the HST groups from today and from my earlier shoot would have four rounds almost touching, and one flyer an inch out. If I shot a whole box for accuracy, I bet my group would grow to around 3" to 4".

I ran 500 rounds of 115 grain Federal POS through it for practice drawing from the #27, and I did OK. I draw from concealment, and in today's cold, windy temps, that meant drawing from under my favorite Dickies hoody, which is many years old and stretched out. Sometimes my sleeves would get trapped in between my grip and my hand, slowing my first shot. I also found out that keeping my Leatherman Wave on my belt at 9 o'clock means that it will snag the bottom of my shirt while lifting it during the draw, thus slowing me down. This is why you practice with your gear exactly like you would be wearing it so you know what works and what doesn't.

The LEM trigger is superb if you practice good trigger control, and horrific if you do it wrong. I'm a big fan of that, as it means that if I learn to not half ass any of my shots at any time, I will be rewarded with consistent hits. The P30's grip lends itself to excellent control and follow up shots. I can't say enough good about it. I haven't had a malfunction of any kind, though if I don't get a proper grip, sometimes my strong hand thumb will prevent the slide from locking back on the last round.

Soon I will be back out for some more shooting, and I'll have more pictures and stuff to post then.

I'm strapped with my Glock on my block. . . .

. . . . .ready to let loose on any Nevco targets that I spot.

This weekend I picked up two 8" round AR500 steel targets with hangers from GreenTop, and set them up and tested them out. I'm a big fan. After shooting Andy's steel at 200 yards with a rifle, I was sold, so when I got the opportunity to buy them sans shipping cost, I jumped on it.

I was fortunate to find the leftover 9mm rounds that were hidden from that range trip with Andy, and my brother, his girlfriend, and I shot up the 150 or so rounds to ring in the new steel. It was a good time. I'm also shooting with the aide of a shot-timer now, so I have no excuse to not get better at shooting.

I'm not using the Zack holster anymore, but have instead resorted back to the Bladetech IWB after a bit more modifications to make it conceal better. It's now an abomination, which is the title I now refer to it as whenever I speak of it. The Abominable Bladetech hides a full sized Glock 17 like it's not even there, and will do it all day long without any problems, even while driving or sitting for hours. It dawned on me how dangerous having screws inside the trigger guard can be if they ever decided to back out, so I epoxied the rubber plug thingy to the outside of the holster, and it's very secure. I also added some padding and stuff, as well as some duct tape, and it's now a sight to behold. Damn, it's comfortable though, and fast, too. I'm averaging around 1.9ish seconds from a concealed draw, which is not too shabby. I'll have to get some fresh pictures out there for folks to laugh at.

Like they say: if you can't be a good example, then be a horrible warning!

A Zack holster review

The Truth About Guns reviews the Zack holster from Dale Fricke, and it's very informative, including a short video of it in action. There is some hate for the concept in comments, as well as some hate for AIWB in general.

I didn't try carrying with the Zack anywhere else on the waistband other than in the front, and I also didn't try canting the weapon. One thing I noted in comments was that the gun carries better if you adjust the slack out of the cord so that it takes the weight of the gun and keeps the trigger guard area off the belt.

I also added in my thoughts on the best part of using the Zack for AIWB: you don't have to holster a loaded pistol down into your pants -- that being the most dangerous part of AIWB carry. You will notice that he snaps the Zack onto the Glock while it is out of the waistband, and then tucks it in.

Appendix IWB on the cheap

I've been experimenting left and right with affordable ways to appendix carry a handgun, and I've had a decent amount of success. Here's some stuff I've been messing around with:



Click the pictures to make them bigger, and also feel free to browse my growing four+ year old collection of pictures at Photobucket.

The Bladetech Nano (top left) for my Glock 17 is a well made holster, and is suitable for AIWB carry if you're not too concerned with concealment. It's very thin, light, and the attachment loops are spread apart which keeps the profile thin for waistband comfort, but it also doesn't tuck the gun's grip in towards the abdomen. I've tried to modify it to make it conceal better, and I have one more idea, but so far I've struck out. I think it set me back about $35, and for that price it's a steal.



Next to a plain old Bladetech IWB holster that I've modified, you can see the difference in the belt loops and that there's less holster overall. Keeping those loops out to the side makes a big difference, as the amount of thickness stuffed in between your belt and jelly roll is minimal:



I've had great success with the Bladetech IWB, and I had to do some more modifications since my last post. I've now mounted the plug/spacer/old-rubber-piece-from-a-rifle's-buttstock directly to the holster, instead of to a strip of leather, and it works better, but the screws holding it on are dragging on the trigger guard. Back to the drawing board.



The DeSantis Sof-Tuck I got on sale at Midway for $15, and it's a very sturdy and well made holster. It is a bit thick, as the tuckable J-hook piece adds material between the gun and the waistband, but it does hold the Glock 26 well:



I recommend the baggie-over-the-gun-stuffed-in-the-holster trick to loosen it up a bit. I didn't get any concealment pictures of it with the Glock, but you did see the same holster a few days ago with a Kahr CW9.

The Zack holster is still good to go. I've modified it a bit so that I can put the gun on and take it off the belt without unholstering the pistol. This is done as a margin of safety, as unholstering a gun and laying it on the car seat next to you while you jack around the front of your pants is not exactly the safest idea:



I've even modded it since that picture was taken by drilling new holes in the back of the belt clip, near the top, and running the cord through there. The gun sits at a perfect height in my waistband, doesn't move around, and is still tuckable for concealment if you so desire:




A word of caution here: because the Glock 26 has such a short slide, it can pop up out of your waistband if you have a spare tire around your guts. Since there isn't much slide down inside the pants, if you push your gut out while bending over down to the ground, there is enough leverage against the grip to potentially shove the whole piece out of your belt. I can make it do this, but I have to try to make it happen. It's a double edged sword -- the Glock 26 conceals so well in this holster because the grip is short and doesn't stick out, and the Glock 17 is way more secure because its longer slide gives opposing leverage preventing it from coming out, but it doesn't conceal as well because the grip is longer. I wear my pants low enough that the gun sits just below my gut, so in effect my jelly roll becomes a retention device, so I can make the Glock 26 work.

I also found an AIWB holster where I didn't expect it: inside my pocket. I was thinking about the Remora holsters the other day, which don't expose any clips or loops or such, and it struck me that the DeSantis Super Fly is basically the same thing, so I gave it a whirl:




I'm happy to report that it works perfectly. I left the detachable shield thingy on it to give more traction, and was careful when tucking it that I didn't jam my shirt up underneath of it, so that if I had to draw it it would yank the whole thing out. I did have all day comfort without any movement or loops showing, so there's another option for carry. I have one of these also for the Glock 26, and I'm going to give that a go to see if it will work.

So there it is. Cheap AIWB solutions. It's a dirty job, but someone has to throw themself onto the alter of concealment. Folks, it's not easy trying on holsters all day, taking pictures of your crotch in the dirty mirror in the kid's bathroom, but I do it for you, dear readers!